Changsha Sollroc Engineering Equipments Co., Ltd
FOCUS IN MANUFACTURING OF HIGH QUALITY DTH AND RC DRILLING TOOLS.
Add to Cart
Product description
The life of the DTH bit depends on the material and technology of the bit. Sollroc DTH bit is made of the most efficient high quality alloy steel.
Use quality forged steel, heat treatment and shot peening to provide a durable and reliable balance of strength and toughness.
4 inch DTH bit-The data is referenced by DHD340A/COP44 flat face bit
| Bit diameter | Flushing holes No.*Button Dia. mm | No.*Button Dia. mm |
Weight (kg) |
Part No. | ||
| mm | inch | Gauge Buttons | Front Buttons | |||
| 105 | 4 1/8” | 2*Ф18 | 6*Ф14 | 5*Ф13 | 7.5 | HD45-105 |
| 110 | 4 5/16” | 2*Ф18 | 7*Ф14 | 6*Ф13 | 7.8 | HD45-110 |
| 115 | 4 1/2” | 2*Ф18 | 7*Ф14 | 7*Ф13 | 8.5 | HD45-115 |
| 120 | 4 3/4” | 2*Ф18 | 8*Ф14 | 7*Ф13 | 8.8 | HD45-120 |
| 125 | 4 15/16” | 2*Ф18 | 8*Ф14 | 7*Ф13 | 9.0 | HD45-125 |
| 130 | 5 1/8” | 2*Ф18 | 8*Ф14 | 7*Ф13 | 9.4 | HD45-130 |
Sollroc DTH hammers
| Hammers | Bit Shank | Connection Thread | Suitable bit | Working pressure | Air consumption | |
| 2" | BR2 | RD50 box | ￠70-￠90mm | 0.7-1.75Mpa | 0.7Mpa | 4.5m3/min |
| 1.0Mpa | 4m3/min | |||||
| 1.4Mpa | 5m3/min | |||||
| 3" | DHD3.5 COP32/COP34 M30 | API 2 3/8"Reg | ￠90-￠110mm | 1.0-1.5Mpa | 1.0Mpa | 4.5m3/min |
| 1.5Mpa | 9m3/min | |||||
| 4" | DHD340 COP44 QL40 SD4 M40 | API 2 3/8"Reg | ￠110-￠135mm | 1.0-2.5Mpa | 1.0Mpa | 6m3/min |
| 1.8Mpa | 10m3/min | |||||
| 2.4Mpa | 15m3/min | |||||
| 5" | DHD350 COP54 QL50 SD5 M50 | API 2 3/8"Reg/API 3 1/2"Reg | ￠135-￠155mm | 1.0-2.5Mpa | 1.0Mpa | 9m3/min |
| 1.8Mpa | 15m3/min | |||||
| 2.4Mpa | 23m3/min | |||||
| 6" | DHD360 COP64 QL60 SD6 M60 | API 3 1/2"Reg | ￠155-￠190mm | 1.0-2.5Mpa | 1.0Mpa | 10m3/min |
| 1.8Mpa | 20m3/min | |||||
| 2.4Mpa | 28.5m3/min | |||||
| 8" | DHD380 COP84 QL80 SD8 | API 4 1/2"Reg | ￠195-￠254mm | 1.0-2.5Mpa | 1.0Mpa | 15m3/min |
| 1.8Mpa | 26m3/min | |||||
| 2.4Mpa | 34m3/min | |||||
| 10" | SD10 Numa100 | API 6 5/8"Reg | ￠254-￠311mm | 1.0-2.5Mpa | 1.0Mpa | 22m3/min |
| 1.8Mpa | 40m3/min | |||||
| 2.4Mpa | 55m3/min | |||||
| 12" | DHD1120 SD12 Numa120 | API 6 5/8"Reg | ￠305-￠445mm | 1.0-2.5Mpa | 1.0Mpa | 30m3/min |
| 1.8Mpa | 56m3/min | |||||
| 2.4Mpa | 78m3/min | |||||
Features
1. Long life of bit: alloy steel material has a long service life, which is higher than similar products;
2. High drilling efficiency: the drill teeth are wear-resistant, so that the drill bit can always be sharp, thus greatly improving the entering speed of the teeth;
3. Steady drilling speed: the drill bit breaks the rock by scraping and cutting;
4. Good spacing effect: strong abrasion resistance and good spacing performance, which enables the cutting teeth to be utilized efficiently;
Application
Wide application range: it has been proved by practice that this drill bit is suitable for drilling in soft and medium hard formations, such as carbonate rock, limestone, cretaceous rock, clay rock, siltstone and sandstone.
The submersible drill bit from 2 inches to 18 inches in diameter and has a variety of the most common end face shapes, alloy tooth styles and shank styles to match the application and rock formations you are drilling in.
We can customize the drill bit according to your requirement. Different drill head shapes are selected according to different rock formations.
Related products
